Edition
2018
Workshop Manual
PARK PRO 340 IX
Chapter
1 General instructions
Page
8
1.3 Identication
Machine
L
WA
dB
kg
kW - /min
1
Each machine is supplied with a label (1) afxed
to the column, indicating the technical data, the
model and the serial number.
The model and serial number must be indicated
on the intervention sheet, when requesting
application of the warranty and are indispensable
in the ordering of spare parts.
Transmission
1
This machine is equipped with 2 hydrostatic
transmissions.
These components are supplied by an external
manufacturer and are
built to precise technical specications which
distinguish it from similar products made by the
same manufacturer. The serial number indicated
on the label (1) makes it possible to correctly
identify the product and its characteristics and
must always be cited when ordering spare parts or
requesting any information from the Manufacturer.
Engine
1
The engine is built to precise technical
specications which distinguish it from similar
products made by the same manufacturer. The
serial number indicated on the label (1) makes it
possible to correctly identify the product and its
characteristics and must always be cited when
ordering spare parts or requesting any information
from the Manufacturer.
To Next Page
Loading...
Need help?
General
