Edition
2018
Workshop Manual
PARK PRO 340 IX
Chapter
1 General instructions
Page
5
Warning!
This symbol indicates that failure to carefully follow the instructions may result
in injury.
Caution!
This symbol indicates that failure to carefully follow the instructions may result
in damage to materials and equipment.
NOTE
This text highlights the need to read the information carefully.
This symbol indicates a reference to another section of the manual.
Click on the number to go to the section indicated.
Highlights all the operations which require different methods of intervention
depending on the version of the machine, any modications which have been
made over time and the accessories installed.
NOTE
All the indications “front”, “back”, “right” and “left” are in relation to the
position of the seated operator.
The description of elementary operations which any good mechanic
should be able to perform have deliberately been left out of this manual,
giving preference to more specic aspects with indications of the most
suitable methods for optimum execution of the works.
Please take care to read all the contents in this manual so as to become
familiar with the machine: this is essential if you want to work rationally
on the machine without making mistakes and wasting time.
Remember that all problems connected with use of the machine are
amply covered in the User Manual.
Hot parts
Please note that the engine and exhaust systems heat up signicantly during use. To avoid
the risk of injury, give the engine and exhaust system time to cool down before starting any
repair or maintenance work on the machine.
1.1.5 Abbreviations
The following abbreviations are used in this manual:
Chap. = Chapter - Par. = Paragraph - HST = Hydrostatic Transmission - PTO = Power
Take-Off.
1.1.6 Safety instructions
A. Level of technician training
All maintenance, disassembly and repair operations must be carried out by expert
maintenance mechanics who are familiar with all the safety and accident prevention
regulations and have read the procedures described in this manual
To Next Page
Loading...
Need help?
General
