Edition
2018
Workshop Manual
PARK PRO 340 IX
Chapter
4 Hydraulic system
Page
50
4.8 Transmission uid
4.8.1 Intervention times table
To check, top up and change the uid or change the lter, consult the following table.
Action
First
time
Then
every:
Fluid type Quantity Ref. heading
(in service hours)
Check - top up to level 50
5W-50
(SAE 75W-90)
4.8.2
Change the uid 5 200 4.2 litres
4.8.3
Replace the reservoir uid lter 5 200
4.8.4
4.8.2 Check and top-up
A
1. Position the machine on even ground.
2. Open the bonnet.
3. Read off the oil level in the reservoir. The level
should be on the line (A) and not over it.
4. Top up if necessary.
4.8.3 Change
Before proceeding to drain off the uid, carry out the following operations:
1. Run the machine at variable speeds for 10-20 minutes to heat up the transmission uid.
1. Position the machine on even ground.
1. Put the parking brake on.
1. Open the bonnet.
Drain off the uid
A
A1
A2
1. Disengage the transmission - lever (A) out
(pos. A2).
To Next Page
Loading...
Need help?
General
