32 General Safety and Regulatory Information TB9100/P25 CG/P25 TAG Installation and Operation Manual
© Tait Limited March 2014
All servicing should be carried out only when the PMU is powered through
a mains isolating transformer of sufficient rating.
AC Power Connection
Explosive Environments
Warning
Do not operate the equipment near electrical blast-
ing caps or in an explosive atmosphere. Operating the equip-
ment in these environments is a definite safety hazard.
Proximity to RF Transmissions
Do not operate the transmitter when someone is standing within 3ft.
(90cm) of the antenna. Do not operate the transmitter unless you have
checked that all RF connectors are secure.
High Temperatures
Take care when handling a PMU or PA which has been operating recently.
Under extreme operating conditions (+140°F [+60°C] ambient air
temperature) or high duty cycles, the external surfaces of the PMU and PA
can reach temperatures of up to +176°F (+80°C).
LED Safety (EN60825-1)
This equipment contains Class 1 LED Products.
English (en) The PMU must be connected to a grounded mains
socket-outlet.
Norsk (no) Apparatet må tilkoples jordet stikkontakt.
Suomi (fi) Laite on liitettävä suojamaadoitus-koskettimilla
varustettuun pistorasiaan.
Svenska (sv) Apparaten skall anslutas till jordat uttag.
To Next Page
Loading...
Need help?
General
