TB9100/P25 CG/P25 TAG Installation and Operation Manual Preface 7
© Tait Limited March 2014
Preface
Scope of Manual
This manual primarily describes the TB9100 base station but also includes
the P25 CG console gateway and P25 TAG trunked analog gateway. When
“base station” is referred to, this generally applies to the console gateway and
trunked analog gateway as well. When “reciter” is referred to, this generally
applies also to the gateway module.
This manual is intended for use by experienced technicians familiar with
installing and operating base station and gateway equipment. It includes a
technical description of the equipment, maintenance and troubleshooting
information.
Document Conventions
“File > Open” means “click File on the menu bar, then click Open on the
list of commands that pops up”. “Monitor > Module Details > Channel
Module” means “click the Monitor icon on the toolbar, then in the
navigation pane find the Module Details group, and select Channel Module
from it”.
Within this manual, four types of alerts may be given to the reader. The
following paragraphs illustrate each type of alert and its associated symbol.
Warning This alert is used when there is a hazardous situa-
tion which, if not avoided, could result in death or serious
injury.
Caution This alert is used when there is a hazardous situation which,
if not avoided, could result in minor or moderate injury.
Notice This alert is used to highlight information that is required to
ensure procedures are performed correctly. Incorrectly performed proce-
dures could result in equipment damage or malfunction.
This icon is used to draw your attention to information that may improve
your understanding of the equipment or procedure.
To Next Page
Loading...
Need help?
General
