Tektronix DPO5034B Printable Help

Behavior
The instrument changes the components, voltage threshold levels, speed, and signal type, and uses those to decode the
selected 8B10B bus.
What do you want to do next?
Learn more about bus setups.
Learn about bus configuration.
Learn about digital setups.
Learn how to set up an I2C serial bus.
Learn how to set up an SPI serial bus.
Learn how to set up a USB serial bus.
Learn how to set up an RS-232 serial bus.
Learn how to set up a MIPI DSI1 Serial Bus
Learn how to set up a MIPI CSI2 Serial Bus
Learn how to set up an 8B10B Serial Bus
Learn how to set up a CAN Bus
Learn how to set up a MIL-1553 Bus
Learn how to set up an Ethernet Bus
Learn how to set up an Custom serial bus.
Learn how to troubleshoot a serial bus.
Learn how to track down serial bus anomalies.
Learn how to view analog characteristics of a digital waveform.
Learn how to trigger on a bus.
Set up a custom serial bus
NOTE. Custom serial bus setup is available only on instruments with the SR-CUST option.
From the Bus Setup window, select Serial from the Bus Type list and then select the Custom Serial bus type.
NOTE. The Components for the Custom bus standard are set by the installed custom decoder.
For information on the controls, click the buttons.
■
Bus List
■
Display & Clear
■
Label
■
Position
■
Serial Input
■
Serial Threshold
Bus setups
124 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

Tektronix DPO5034B Specifications

General

Brand	Tektronix
Model	DPO5034B
Category	Test Equipment
Language	English