Tektronix DPO5034B Printable Help

Signal processing features
■
Waveform math. Set up math waveforms using the basic arithmetic functions, including FFT, or create more advanced
math waveforms using the math expression editor. Waveform expressions can contain measurement results and other math
waveforms.
■
Spectral analysis. Display spectral magnitude and phase waveforms based on your time-domain acquisitions. Control the
instrument using the traditional Spectrum analyzer controls, such as span, center frequency, and resolution bandwidth.
■
Mask testing. Use Mask Testing for signal violation detection and pass/fail testing. Test signals against a user defined
mask, or, on some models, with the Mask Testing Option, you can test against industry standard masks.
Display features
■
Color LCD display. Identify and differentiate waveforms easily with color coding. Waveforms, readouts, and inputs are
color matched to increase productivity and reduce operating errors.
■
Digital phosphor. The Digital Phosphor Oscilloscope can provide visual clues as to the relative rate of occurrence of
waveform features or anomalies by combining many separate acquisitions of a waveform into a single intensity-graded or
color-graded display.
■
Fit to screen. The Digital Phosphor technology performs the compression required to represent all record points on the
screen, even at the maximum record length settings.
■
MultiView Zoom. To take advantage of the full resolution of the instrument, you can zoom in on a waveform to see fine
details. Both vertical and horizontal zoom are available. You can also zoom in on multiple areas of a single waveform
simultaneously and on multiple waveforms at the same time.
Measurement features
■
Cursors. Use Cursors to take simple voltage, time, and frequency measurements.
■
Automatic measurements. Choose from a large palette of amplitude, time, histogram, and communication measurements.
You can customize the measurements by changing reference levels or by adding measurement gating. Statistics (mean,
maximum, minimum, standard deviation and population) are available for each measurement value.
Trigger features
■
Simple and advanced trigger types. Choose a simple edge trigger or advanced trigger types to help you capture a
specific signal fault or event.
■
Dual triggers. Use the A (main) trigger system alone or add the B trigger to capture more complex events. You can use the
A and B triggers together to set up a delay-by-time or delay-by-events trigger condition.
Convenience features
■
Autoset. Use Autoset to quickly set up the vertical, horizontal, and trigger controls for a usable display.
■
MyScope. Use MyScope to create your own control windows for easy access to the controls you use most often.
■
Touch screen interface. You can operate all instrument functions (except the power switch) from the touch screen
interface. You can also install a mouse and keyboard.
■
Toolbar or menu bar. You can choose a toolbar operating mode that is optimized for use with the touch screen, or a PC-
style menu-bar operating mode that is optimized for use with a mouse.
■
Open desktop. The instrument is built on a Microsoft Windows software platform; the instrument application program starts
automatically when you apply power to the instrument. You can minimize the instrument application and take full advantage
of the built-in PC to run other applications. Moving waveform images and data into other applications is as simple as a copy/
paste operation.
■
Dedicated front panel controls. The front panel (SX models require the DPO7AFP accessory) contains knobs and buttons
to provide immediate access to the most common instrument controls. Separate vertical controls are provided for each
channel. The same functions are also available through the screen interface.
About Tektronix oscilloscopes
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 3

Tektronix DPO5034B Specifications

General

Brand	Tektronix
Model	DPO5034B
Category	Test Equipment
Language	English