To Next Page

To Previous Page

NOTE. These knobs are automatically mapped when certain functions are performed, for example, when the MultiView Zoom

button is pushed.

Bandwidth readout (BW)

Nominal system bandwidth consists of a combination of factors including, but not limited to, probe bandwidth, probe tip

bandwidth, and bandwidth selections made in the Vertical Setup Control Window.

Select the probe controls

From the Vertical menu, select Vertical Setup.

Overview. The Probe controls provide access to the Probe Setup, Compensation, Deskew, and Attenuation control windows.

To use. Click the Probe buttons to display the Probe Setup control windows:

■

Use Setup to configure the attached probe type. The setup will vary depending on the individual probe you connect.

■

Use Cal to check the status of the attached probe and to compensate the entire signal path from the probe tip to the

digitized signal.

■

Use Deskew to compensate the vertical channels for propagation delays of different length probes.

■

Use Atten to change the default attenuation or gain for the selected probe channel.

What do you want to do next?

Learn more about the Attenuation controls.

Learn more about the Deskew controls.

Learn more about the Probe Compensation controls.

Return to the Vertical Setup control window overview.

Oscilloscope reference

DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 861

Tektronix DPO5034B Printable Help

Other manuals for Tektronix DPO5034B