To Next Page

To Previous Page

Select a search type

From the Analyze menu, select Search; then open the Select tab.

Overview

Use the controls in this window to set up the instrument to automatically search and place mark(s). The instrument can search for

and mark many of the same conditions that are available for triggers.

NOTE. Search and mark operations are not available on digital channels.

This document is for more than one instrument. Your instrument, or instrument setup, may not include some of these features.

For DPO70000SX instruments see Features not available.

To use

For information on the controls, click the buttons.

■

Type

■

Source

■

Search/Mark Controls

NOTE. The Edge search type is standard, all other search types are optional.

Behavior

You can search for and mark regions with particular edges, pulse widths, runts, logic states, rise and fall times, setup and hold

violations and bus types. You can also search on math and reference waveforms.

Analyzing waveforms

298 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

Tektronix DPO5034B Printable Help

Other manuals for Tektronix DPO5034B