Tektronix DPO5034B Printable Help

To use.
■
Click the Trigger Type box and select Bus from the drop-down list.
■
Click the Bus box and select the bus number or name from the drop-down list.
NOTE. You have the option to add a user-defined label for bus sources.
■
Click the Logic Thresholds Setup button to set the voltage threshold levels for the channels in the bus.
■
Select the type of bus cycle or activity to use as the trigger from the Trigger On drop-down list.
■
For some Trigger On selections, you must set additional fields to define other parameters such as for a Ident & Data.
In this example, you need to set the Trigger when Identifier and the And When Data is values. You can also set the
component threshold levels through the Logic Thresholds Setup button.
Click the Trigger On selections to view their parameters.
What do you want to do next?
Learn about bus setups.
Set up a FLEXRAY bus trigger
NOTE. The Bus Trigger Control Window for FLEXRAY Serial option is available only on instruments with option SR-AUTO.
From the Trigger menu, select Bus setup.
Overview. Use the controls to set up the FLEXRAY Bus parameters.
Trigger setups
402 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

Tektronix DPO5034B Specifications

General

Brand	Tektronix
Model	DPO5034B
Category	Test Equipment
Language	English