Toyota 8FGU25 - INJECTION PUMP

INJECTION PUMP
SPECIFICATIONS
Injection order I A-B-C-D
Direction of rotation
Injection interval
Clockwise as viewed from the drive side
Plunger diameter mm (in.)
Feed pump
Cam
lift mm (in.)
Governor type
Timer
Vane type (built-in type)
2.2 (0.087)
Centrifugal (all speed)
Hydraulic
Lubrication method Fuel lubrication
Fuel cut Fuel cut by a solenoid
COMPONENTS
1DZ-II Repair
Section 1.2.3