59
4. MY DESTINATIONS
2
APPLICATION-“Map”
Display audio_U_2nd
7 The following screen will be displayed
when sending data to the USB memory
is complete.
1 Open the cover of the USB/AUX port
and connect a USB memory.
z The USB/AUX port is located on the
instrument panel, or in the console box or
glove box etc. The actual design and but-
ton position will differ depending on the
vehicle. For details, refer to vehicle
“Owner’s Manual”.
2 Press the “SETUP” button.
3 Touch “General”.
4 Touch “Stored Contacts Backup”.
5 Touch “Restore Contact Backup
from USB”.
INFORMATION
● Downloading may not complete cor-
rectly in the following cases:
• If the engine switch is turned off during
downloading
• If the USB memory is removed before
downloading is complete
RESTORING STORED
CONTACTS FROM A USB
MEMORY
Backed-up data can be transferred
from a USB memory to this system.
Transferred addresses and numbers
will be stored in the “Stored” list on the
“My Destinations” screen and “Con-
tacts” screen. (See pages 52 and 163.)
To Next Page
Loading...
Need help?
General
