20
1. AUDIO SYSTEM OPERATION
Display_audio_U_1st
3. RADIO OPERATION (WITH Display Audio SYSTEM)
1 Press the “AUDIO” button.
z The audio system turns on in the last
mode used.
2 Touch “Source” or press “AUDIO”
button to display the audio source se-
lection screen.
3 Touch “AM” or “FM” on the screen.
z If a desired source is not displayed on the
screen, touch or to scroll to
it.
1 Tune in the desired station.
2 Touch one of the left side screen but-
tons (1-6) and hold it until a beep is
heard. This sets the preset frequency
to the screen button. The station’s fre-
quency will be displayed in the screen
button.
z To change the preset station to a different
one, follow the same procedure.
z Touch or to change the preset
page.
SWITCHING TO RADIO MODE PRESETTING A STATION