208
1. SETUP OPERATION
Display audio_U_2nd
1 Touch “Paired Device List”.
2 Touch the desired device.
z The tone of the icons show which profiles
the device supports. (Dimmed icons are
not available.)
z The device’s currently connected profiles
are highlighted.
3 The following screen will be displayed.
z On this screen, the following functions can
be operated.
1 Touch “Rename <<Sample Phone
1>>”.
2 Input the new device name.
3 Touch “OK”.
4 The new device name is shown.
SETTING THE PAIRED
DEVICES
Devices can be disconnected and
each profile connection status can be
changed using the list.
Up to 4 devices can be paired at the
same time.
CHANGING THE PHONE/
DEVICE NAME
The name for your phone can be
changed to allow you to distinguish be-
tween phones if you have more than
one paired (up to 4).