83
1. Bluetooth
®
HANDS-FREE SYSTEM OPERATION
3
Bluetooth
®
HANDS-FREE SYSTEM
Display_audio_U_1st
6. TALK ON THE Bluetooth
®
PHONE
To adjust the volume of the other par-
ty’s voice: Touch “-” or “+”, turn the
“PWR/VOL” knob, or use the volume
switch on the steering wheel.
To hang up the phone: Press the
switch on the steering wheel or touch
.
To mute your voice: Touch “Mute”.
To input a Key: Touch “0-9”.
To transfer the call: Touch “Handsfree
Mode” or “Handset Mode”.
1 Enter a number by touching the num-
ber keys.
To hang up the phone: Press the
switch on the steering wheel or touch
.
z If the continuous tone signal is registered
in a phonebook, this screen appears. (If
not registered, “Send” and “Exit” are not
displayed.)
z Confirm the number displayed on the
screen and touch “Send”. The number
before marked sign will be sent.
z When you touch “Exit”, this function will
be finished and normal tone screen
appears.
To hang up the phone: Press the
switch on the steering wheel or touch
.
While you are talking on the phone,
this screen is displayed. You can do
the operation below on the screen.
INFORMATION
● When you change from cellular phone
call to Hands-free call, the Hands-free
screen will be displayed and you can
operate it on the screen.
WHEN YOU TOUCH “0-9”
To Next Page
Loading...
Need help?
General
