51
1. AUDIO SYSTEM OPERATION
2
AUDIO SYSTEM
Display_audio_U_1st
2 Touch “Source” or press “AUDIO”
button to display the audio source se-
lection screen.
3 Touch “BT” on the screen.
z If a desired source is not displayed on the
screen, touch or to scroll to
it.
1 Touch “Connect” on the screen.
2 Touch “Yes” to connect your portable
player.
3 When this screen is displayed, perform
a device discovery from your portable
audio player.
4 Input the passcode displayed on the
screen into your portable audio player.
z A passcode is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth
®
phones. Depending on the
type of Bluetooth
®
phone being
connected, a message confirming
registration may be displayed on the
Bluetooth
®
phone’s screen. Respond and
operate the Bluetooth
®
phone according
to the confirmation message.
z If you want to cancel it, touch “Cancel”.
CONNECTING A Bluetooth
®
AUDIO PLAYER
To use the Bluetooth
®
audio system,
you need to register your portable au-
dio player into the system. Once you
have registered it, you can enjoy your
music on the vehicle’s audio system.
WHEN A Bluetooth
®
DEVICE IS
NOT REGISTERED
If you have not yet registered any
Bluetooth
®
device, you must first
register it according to the following
procedure.
To Next Page
Loading...
Need help?
General
