50
1. AUDIO SYSTEM OPERATION
Display_audio_U_1st
Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
1 Press the “AUDIO” button.
z The audio system turns on in the last
mode used.
INFORMATION
● Portable audio players must correspond
to the following specifications in order to
be connected to the Bluetooth
®
audio
system. However, please note that some
functions may be limited depending on
the type of portable audio player.
• Bluetooth
®
Specification
Ver.1.1 or higher
(Recommended: Ver.2.1+EDR or
higher)
• Profile
A2DP (Advanced Audio Distribution
Profile)
Ver.1.0 or higher
(Recommended: Ver.1.2 or higher)
This is a profile to transmit stereo
audio or high quality sounds to the
headphone.
AVRCP (Audio/Video Remote Con-
trol Profile)
Ver.1.0 or higher
(Recommended: Ver.1.4 or higher)
This is a profile to remote control the
A/V equipments.
● Refer to http://www.toyota.com/
Bluetooth/ to find approved Bluetooth
®
devices for this system.
CAUTION
● FCC WARNING: Changes or modifica-
tions not expressly approved by the
party responsible for compliance could
void the user’s authority to operate the
equipment.
● CAUTION: Radio Frequency Radiation
Exposure
This equipment complies with FCC radi-
ation exposure limits set forth for uncon-
trolled equipment and meets the FCC
radio frequency (RF) Exposure Guide-
lines in Supplement C to OET65 and
RSS-102 of the IC radio frequency (RF)
Exposure rules. This equipment has
very low levels of RF energy that it
deemed to comply without maximum
permissive exposure evaluation (MPE).
But it is desirable that it should be
installed and operated with at least 20
cm and more between the radiator and
person’s body (excluding extremities:
hands, wrists, feet and ankles).
● Co-location: This transmitter must not be
co-located or operated in conjunction
with any other antenna or transmitter.
SWITCHING TO Bluetooth
®
AUDIO MODE
To Next Page
Loading...
Need help?
General
