EasyManuals Logo

TP-Link TL-WA7210N User Manual

TP-Link TL-WA7210N
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
TL-WA7210N
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
6
Chapter 2. Connecting the Device
2.1 System Requirements
Each PC in the LAN needs a working Ethernet Adapter and an Ethernet cable with RJ45
connectors.
TCP/IP protocol must be installed on each PC.
Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or
later.
If the device is configured to AP Client Router mode, you also need:
Wireless Internet Service Provider (WISP).
If the device is configured to AP Router mode, you also need:
Broadband Internet Access Service (DSL/Cable/Ethernet).
One DSL/Cable Modem that has an RJ45 connector (you do not need it if you connect the
router to the Ethernet.).
2.2 Installation Environment Requirements
Operating temperature: -30~70
Operating Humidity: 10%~90% RH, Non-condensing
2.3 Connecting the Device
To connect the AP, please follow the steps below:
1. Power off your PC, Cable/DSL Modem, and the AP.
2. Locate an optimum location for the AP. The best place is usually at the center of your
wireless network. The place must accord with the
Installation Environment Requirements.
3. Adjust the direction of the antenna. Normally, upright is a good direction.
After finishing the steps above, please choose the operation mode you need and carry out the
corresponding steps. There are seven operation mode supported by this AP: AP Client Router,
AP Router, Access Point, Multi-SSID, Repeater (Range Extender), Bridge with AP and
Client.

Table of Contents

Other manuals for TP-Link TL-WA7210N

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-WA7210N and is the answer not in the manual?

TP-Link TL-WA7210N Specifications

General IconGeneral
2.4 GHzYes
Modulation-
Frequency band2.4 - 2.4835 GHz
Number of users- user(s)
Channels quantity- channels
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab
Receiver sensitivity802.11n\\r 150M: -76dBm\\r 121.5M: -78dBm\\r 108M: -80dBm\\r 81M: -84dBm\\r 54M:-87dBm\\r 40.5M:-91dBm\\r 27M:-92dBm\\r 13.5M:-95dBm\\r 802.11g\\r 54M: -79dBm\\r 48M: -81dBm\\r 36M: -85dBm\\r 12M: -92dBm\\r 6M:-95dBm
Ethernet LAN data rates10, 100 Mbit/s
Maximum data transfer rate150 Mbit/s
Maximum operating distance150 m
InternalNo
CertificationCE, FCC, RoHS
WAN connectionEthernet (RJ-45)
Ethernet LAN (RJ-45) ports1
Security algorithms128-bit WEP, 152-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-30 - 70 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 90 %
Input current1 A
AC input voltage12 V
Compatible operating systemsMicrosoft Windows 98SE, NT, 2000, XP, Vista, Windows 7/8, MAC OS, NetWare, UNIX, Linux
Antenna gain level (max)12 dBi
Weight and Dimensions IconWeight and Dimensions
Depth120 mm
Width265 mm
Height83 mm

Related product manuals