EasyManuals Logo

Triumph Scrambler 900 User Manual

Triumph Scrambler 900
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
CLEANING AND STORAGE
151
Where to be Careful
Caution
Do not use high pressure spray
washers or steam cleaners.
Use of high pressure spray washers
and steam cleaners may damage
seals, and cause water and steam
to be forced into bearings and other
components causing premature wear
from corrosion and loss of lubrication.
Caution
Do not spray any water at all near the
air intake duct.
The air intake duct is located under
the rider’s seat, under the fuel tank or
near the steering head.
Any water sprayed in this area could
enter the airbox and engine, causing
damage to both items.
Do not get water near the following
places:
Air and any intake duct
Any visible electrical components
Brake cylinders and brake calipers
Handlebar switch housings
Steering head bearings
Instruments
Oil filler cap
Rear bevel box breather (if equipped)
Rear of headlights
Seats
Suspension seals and bearings
Under the fuel tank
Wheel bearings.
Washing
To wash the motorcycle, do the
following:
Make sure that the motorcycle
engine is cold.
Prepare a mixture of clean, cold
water and mild automotive cleaner
or low alkaline soap.
Do not use a highly alkaline soap
as commonly found at commercial
car washes because it will leave a
residue on painted surfaces and
may also cause water spotting.
Wash the motorcycle with a sponge
or soft cloth.
Do not use abrasive scouring pads
or steel wool. They will damage the
finish.
Rinse the motorcycle thoroughly
with clean, cold water.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Scrambler 900 and is the answer not in the manual?

Triumph Scrambler 900 Specifications

General IconGeneral
Displacement900 cc
Max Torque80 Nm @ 3, 250 rpm
Fuel SystemMultipoint sequential electronic fuel injection
Transmission5-speed
FrameTubular steel, with twin cradles
Seat Height790 mm
Bore x Stroke84.6 mm x 80 mm
ClutchWet, multi-plate assist clutch
SwingarmTwin-sided, tubular steel
Front Tyre100/90-19
Rear Tyre150/70 R17
Rake25.8°
Engine TypeLiquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Max Power65 PS / 64 bhp (47.8 kW) @ 7, 250 rpm
ExhaustStainless steel 2-into-2 exhaust system with twin silencers
Front Suspension41 mm telescopic forks, 120 mm travel
Rear SuspensionTwin shocks, adjustable preload
Front BrakesSingle 310 mm disc, Brembo 4-piston caliper, ABS
Rear BrakesSingle 255mm disc, Nissin 2-piston caliper, ABS
Front Wheel19 x 2.5 in
Rear Wheel17 x 4.25 in
Fuel Tank Capacity12 L
Instrument DisplayLCD multi-functional instrument pack with analogue speedometer
Length2, 125 mm

Related product manuals