Triumph Scrambler 900 User Manual

MAINTENANCE AND ADJUSTMENT
95
Scheduled Maintenance
Warning
Triumph Motorcycles cannot accept
any responsibility for damage or injury
resulting from incorrect maintenance
or improper adjustment carried out by
the owner.
Incorrect or neglected maintenance
can lead to a dangerous riding
condition.
Always have an authorized Triumph
dealer carry out the scheduled
maintenance of this motorcycle.
Warning
All maintenance is vitally important
and must not be neglected. Incorrect
maintenance or adjustment may cause
one or more parts of the motorcycle
to malfunction. A malfunctioning
motorcycle may lead to loss of control
and an accident.
Weather, terrain and geographical
location affect maintenance. The
maintenance schedule should be
adjusted to match the particular
environment in which the motorcycle
is used and the demands of the
individual owner.
Special tools, knowledge and training
are required in order to correctly carry
out the maintenance items listed in
the scheduled maintenance chart.
Only an authorized Triumph dealer will
have this knowledge and equipment.
Incorrect or neglected maintenance
can lead to a dangerous riding
condition. Always have an authorized
Triumph dealer carry out the
scheduled maintenance of this
motorcycle.
To maintain the motorcycle in a safe
and reliable condition, the maintenance
and adjustments outlined in this section
must be carried out as specified in the
schedule of daily checks, and also in line
with the scheduled maintenance chart.
The information that follows describes
the procedures to follow when carrying
out the daily checks and some simple
maintenance and adjustment items.

Triumph Scrambler 900 Specifications

General

Displacement	900 cc
Max Torque	80 Nm @ 3, 250 rpm
Fuel System	Multipoint sequential electronic fuel injection
Transmission	5-speed
Frame	Tubular steel, with twin cradles
Seat Height	790 mm
Bore x Stroke	84.6 mm x 80 mm
Clutch	Wet, multi-plate assist clutch
Swingarm	Twin-sided, tubular steel
Front Tyre	100/90-19
Rear Tyre	150/70 R17
Rake	25.8°
Engine Type	Liquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Max Power	65 PS / 64 bhp (47.8 kW) @ 7, 250 rpm
Exhaust	Stainless steel 2-into-2 exhaust system with twin silencers
Front Suspension	41 mm telescopic forks, 120 mm travel
Rear Suspension	Twin shocks, adjustable preload
Front Brakes	Single 310 mm disc, Brembo 4-piston caliper, ABS
Rear Brakes	Single 255mm disc, Nissin 2-piston caliper, ABS
Front Wheel	19 x 2.5 in
Rear Wheel	17 x 4.25 in
Fuel Tank Capacity	12 L
Instrument Display	LCD multi-functional instrument pack with analogue speedometer
Length	2, 125 mm