Maintenance and Adjustment
132
Cleaning of the Exhaust System
All parts of the exhaust system of your
motorcycle must be cleaned regularly to
avoid a deterioration of its appearance.
These instructions can be applied to
chrome, brushed stainless steel and
carbon fibre components alike.
Note:
• The exhaust system must be cool
before washing to prevent water
spotting.
Washing
Prepare a mixture of cold water and mild
automotive cleaner. Do not use a highly
alkaline soap as commonly found at
commercial car washes because it leaves
a residue.
Wash the exhaust system with a soft
cloth. Do not use an abrasive scouring
pad or steel wool. They will damage the
finish.
Rinse the exhaust system thoroughly.
Make sure no soap or water enters the
exhausts.
Drying
Dry the exhaust system as far as
possible with a soft cloth. Do not run the
engine to dry the system or spotting will
occur.
Protecting
When the exhaust system is dry, rub
'Motorex 645 Clean and Protect' into the
surface.
It is recommended that regular
protection be applied to the system as
this will both protect and enhance the
system's appearance.
Seat Care
To help maintain its appearance, clean
the seat using a sponge or cleaning
cloth with soap and water.
The use of products containing
silicone will cause discolouration of the
chrome and must not be used.
Similarly, the use of abrasive cleaners
and polishes will damage the system
and must not be used.
To Next Page
Loading...
Need help?
General
