General Information
49
Ignition Switch/Steering Lock
1. Ignition switch/Steering lock
2. LOCK position
3. OFF position
4. ON position
5. PARK position
Ignition Switch Positions
This is a four position, key operated
switch. The key can be removed from
the switch only when it is in the OFF,
LOCK or P (PARK) position.
To LOCK: Turn the key to the OFF
position, push and fully release the key,
then rotate it to the LOCK position.
To PA R K: Turn the ke y f rom the LOC K
position to the P position. The steering
remains locked. The front position lights,
rear light and licence plate light will
illuminate.
Note:
• Do not leave the steering lock in the
P position for long periods of time as
this causes the battery to discharge.
For reasons of security and safety,
always move the ignition switch to the
OFF position and remove the key, when
leaving the motorcycle unattended.
Any unauthorised use of the motor-
cycle may cause injury to the rider,
other road users and pedestrians and
may also cause damage to the
motorcycle.
With the key in the LOCK or P position
the steering will become locked.
Never turn the key to the LOCK or
P positions while the motorcycle is
moving as this will cause the steering
to lock. Locked steering will cause loss
of motorcycle control and an accident.
To Next Page
Loading...
Need help?
General
