General Information
48
Ignition Key
1. Key number tag
In addition to operating the steering
lock/ignition switch, the ignition key is
required to operate the seat lock and
fuel tank cap.
When the motorcycle is delivered from
the factory, two keys are supplied
together with a small tag bearing the
key number. Make a note of the key
number and store the spare key and key
number tag in a safe place away from
the motorcycle.
A transponder is fitted within the key to
turn off the engine immobiliser. To make
sure the immobiliser functions correctly,
only have one of the ignition keys near
the ignition switch. Two ignition keys
near the switch may interrupt the signal
between the transponder and the
engine immobiliser. In this situation the
engine immobiliser remains active until
one of the ignition keys is removed.
Always get replacement keys from your
authorised Triumph dealer. Replacement
keys must be 'paired' with the
motorcycle’s immobiliser by your
authorised Triumph dealer.
To Next Page
Loading...
Need help?
General
