General Information
50
Brake and Clutch Lever
Adjusters
1. Clutch lever shown
2. Marker
3. Adjuster wheel
An adjuster is fitted to the front brake
and clutch levers. The adjusters allow
the distance from the handlebar to the
levers to be changed to one of four or
five positions, to suit the span of the
operator's hands.
To ad j u s t the lev e r s:
Push each lever forward and turn the
adjuster wheel to align one of the
numbered positions with the marker on
the lever holder.
The distance from the handlebar grip to
the released lever is the longest when
set to number one, and the shortest
when set to number four on the clutch
lever or number five on the brake lever.
Do not attempt to adjust the levers
with the motorcycle in motion as this
may lead to loss of motorcycle control
and an accident.
After adjusting the levers, operate the
motorcycle in an area free from traffic
to gain familiarity with the new lever
setting.
Do not loan your motorcycle to
anyone as they may change the lever
setting from the one you are familiar
with causing loss of control or an
accident.
To Next Page
Loading...
Need help?
General
