General Information
53
Left Handlebar Switches
1. Headlight dip switch
2. Direction indicator switch
3. Horn button
4. PASS button
5. SCROLL button
6. SET button
Headlight Dip Switch
High or low beam can be selected with
the headlight dip switch.
To select high beam: Push the switch up.
When the high beam is turned on, the
high beam indicator light will illuminate.
To select low beam: Push the switch
down.
1. Headlight dip switch, high beam
2. Headlight dip switch, low beam
Note:
• A lighting on/off switch is not fitted
to this model. The position light, rear
light and licence plate light all
function automatically when the
ignition is turned to the ON position.
• The headlight will only function
when the ignition switch is turned to
the ON position and the engine is
running.
An alternate way to turn on the
headlight, without the engine
running, is to pull in the clutch lever
then turn the ignition to the ON
position. The headlight is on and
remains on when the clutch lever is
released. The headlight will go off
while pressing the starter button
until the engine starts.
To Next Page
Loading...
Need help?
General
