General Information
57
Activating Cruise Control
To turn on the cruise control system,
press the SET/- button. The cruise
control symbol is shown in the display
screen. The cruise control set speed is
shown as ’--’ indicating that a speed has
not yet been set.
1. Cruise control adjust button, RES/+
2. Cruise control adjust button, SET/-
To activate cruise control, the following
conditions must be met:
• The motorcycle is travelling at a
speed between 19 to 100 mph (30 to
160 km/h).
• The motorcycle is in 3
rd
gear or
higher.
Once these conditions have been met,
press the SET/- button to activate
cruise control.
The word SET is shown below the cruise
control symbol, the cruise control set
speed is shown and the cruise control
light illuminates in the tachometer
indicating that cruise control is active.
1. Cruise control symbol
2. Cruise control set indicator
3. Cruise control set speed
4. Cruise control light
The cruise control system maintains the
set speed until;
• the set speed is adjusted as
described on page 58, or
• cruise control is deactivated as
described on page 58.