General Information
56
Cruise Control
Note:
• Cruise control will not function if
there is a malfunction with the ABS
system and the ABS warning light is
illuminated.
The cruise control buttons are located
on the right hand switch housing and
can be operated with minimum
movement when riding.
Cruise control can be switched on at any
time but it can not be activated until all
the conditions described on page 57
have been met.
Cruise control must only be used
where you can drive safely at a steady
speed.
Cruise control should not be used
when riding in heavy traffic, on roads
with sharp/blind bends or when they
are slippery.
Using cruise control in heavy traffic,
on roads with sharp/blind bends or
when they are slippery, may result in
loss of motorcycle control and an
accident.
This Triumph motorcycle should be
operated within the legal speed limits
for the particular road travelled.
Operating a motorcycle at high speeds
can be potentially dangerous since the
time available to react to given traffic
situations is greatly reduced as speed
increases.
Always reduce speed in consideration
of weather and traffic conditions.
Only operate this Triumph motorcycle
at high speed in closed-course on-
road competition or on closed-course
racetracks. High-speed operation
should only then be attempted by
riders who have been instructed in the
techniques necessary for high-speed
riding and are familiar with the
motorcycle's behaviour in all
conditions.
High-speed operation in any other
circumstances is dangerous and will
lead to loss of motorcycle control and
an accident.
To Next Page
Loading...
Need help?
General
