3-72 BA 50Z3/6003 en – Edition 4.3 * * 5003b330.fm
Operation
3.45 Tying down the machine
The machine must be loaded and transported properly –
Risk of accidents.
☞ It is essential that you read the safety instructions at the beginning of this
chapter and follow any other safety instructions relevant in your country.
• Ensure that the authorized maximum height is not exceeded.
• Secure the tracks of the machine at the front, rear and at the sides.
• Lower the stabilizer blade and the boom.
• Firmly tie down the machine at the eye hooks A onto the platform, with belts or chains
of adequate size.
• Before transporting the machine through heavy rain:
close the outlet of the exhaust silencer with a simple cap or suitable adhesive tape.
• Ensure that the user of the transport vehicle knows the overall height, width and
weight of his vehicle (incl. machine) before departure, as well as the legal transport
regulations of the country or countries where transport is to take place.
3.46 Travelling signal (option)
Careful when reversing or driving forward –
Risk of accidents.
☞ There must be nobody within the risk zone of the machine when changing
the driving direction.
☞ Do not rely on the drive signal under any circumstances when changing
driving direction.
The warning device consists of a signal transmitter that emits an acoustic signal when driv-
ing forward or backward.
This signal sounds until the levers are moved to neutral position.
Have the signal transmitter repaired by an authorized workshop if it does not sound when
driving.
Fig. 153: Tying down the machine
A
To Next Page
Loading...
Need help?
General
