BA 50Z3/6003 en – Edition 4.3 * 5003b330.fm 3-25
Operation
High speed
The machine has two drive speeds which can be selected as follows:
☞ Press switch 42.
➥ The machine now moves at higher speed.
➥ Indicator light 53 on the round display element illuminates
– see Control elements 50Z3 2 / 6003 2 (from serial no.AJ02777) on page 3-9.
The drive gear shifts to second speed after high speed is selected, the machine moves at
higher speed. In case of increased resistance (grading, changing direction, travelling
uphill), the drive gear shifts to the lower speed. The machine automatically shifts back to
second speed is soon as there is no resistance.
Reduced tractive power in high speed can affect machine handling when cornering.
Moving off
The machine will not move off unless the left-hand control lever is folded down.
After starting the engine:
☞ The alternator charge indicator light goes out.
☞ Press the drive pedal slowly.
➥ Machine moves off.
Hydraulic brake
The pedals automatically return to their initial positions as soon as they are released. This
creates sufficient hydraulic braking effect.
When driving downhill, the automatic hydraulic brake prevents the machine from “racing”.
The machine does not run any faster than the admissible drive speed.
Mechanical brake
The parking brake is designed as a negative-action and hydraulically actuated multi-disc
brake.
This brake is automatically applied after some time as soon as the drive levers are in neu-
tral position.
42
Fig. 62: High speed (up to serial no. AH02781)
42
Fig. 62: High speed (from serial no. AJ02777)
To Next Page
Loading...
Need help?
General
