BA 50Z3/6003 en – Edition 4.3 * 5003b530.fm 5-49
Maintenance
Powertilt lubrication points (option)
Perform maintenance of the Powertilt unit once a day with the other maintenance work for
the machine.
Perform visual checks for possible defects, damage or cracks.
Remove all dirt on and around moving parts.
Apply grease via grease nipples 15.
– see chapter 3.60 Powertilt (option) on page 3-110
Lubrication points of hydraulic quickhitch (option)
Before picking up an attachment, the driver must ensure that it can be hitched cor-
rectly by removing all dirt on either claw of the quickhitch.
Perform maintenance on the quickhitch once a day with the other maintenance
work for the machine.
Perform visual checks for possible defects, damage or cracks.
Remove all dirt on and around moving parts.
The claws must be clean and slightly greased.
Apply grease to the friction surfaces of the lock mechanism via 2 grease nipples 16 on
either side of the quickhitch (see Fig. 322).
Before starting work, check the acoustic signal. You must be able to hear the acoustic sig-
nal as you actuate the switch.
15
Fig. 321: Powertilt lubrication points
Fig. 322: Quickhitch lubrication points
16
To Next Page
Loading...
Need help?
General
