WinGD X62DF-S2.0 User Manual

Marine Installation Manual 2022-03 5-1
5 Engine Automation
5.1 DENIS
X62DF-S2.0
5 Engine Automation
The Engine Control System (ECS) provides data bus connection to the Propul-
sion Control System (PCS) and the Alarm and Monitoring System (AMS). The
AMS is usually provided by the shipyard.
The leading suppliers of propulsion control systems approved by WinGD ensure
complete adaptation to engine requirements.
Figure 5-1 Engine automation architecture
5.1 DENIS
WinGD’s standard electrical interface is DENIS, which is in line with approved
propulsion control systems.
DENIS The Diesel Engine CoNtrol and optImising Specification (DENIS)
interface contains specifications for the engine management of all
WinGD two-stroke marine diesel engines.
ECS WinGD provides a fully integrated ECS, which takes care of all
Flex system-specific control functions, e.g. fuel injection, exhaust
valve control, cylinder lubrication, crank angle measurement, and
speed/load control. The system uses modern bus technologies for
safe transmission of sensor signals and other signals.
SM-0678
GVU
or
iGPR
Propulsion Control System
FGSS
Engine Control System
(ECS)
Remote Control
System
Engine Safety
System
Alarm and Monitoring
System
DENIS
specification
iCER
Control
Unit
iCER
Control
Unit
iCER
Control
Unit
EGC
Control
Unit
iCER System

WinGD X62DF-S2.0 Specifications

General

Brand	WinGD
Model	X62DF-S2.0
Category	Marine Equipment
Language	English