EasyManuals Logo
Home>WinGD>Marine Equipment>X62DF-S2.0

WinGD X62DF-S2.0 User Manual

Default Icon
259 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Marine Installation Manual 2022-03 1-1
1 Engine Summary
1.1 Engine capability and features
X62DF-S2.0
1 Engine Summary
The WinGD X62DF-S2.0 is a camshaftless, low-speed, reversible and rigidly di-
rect-coupled two-stroke engine. It features a low-pressure gas operation and a
common-rail injection system combined with the Intelligent Control by Exhaust
Recycling (iCER) system.
iCER operating
mode options
The WinGD X62DF-S2.0 is available in two variants:
• iCER gas mode
• iCER gas and diesel Tier III mode
The iCER gas mode improves the gas mode performance to significantly reduce
the emissions, especially methane emissions. Alternatively, the iCER gas and
diesel Tier III mode additionally provides Tier III compliance while operating in
diesel mode.
Table 1-1 X62DF-S2.0 summary values for Maximum Continuous Rating (MCR)
This chapter introduces the engine. It focuses on all aspects of the engine that
may be different from other engines. This chapter also highlights the suitability
of the engine.
1.1 Engine capability and features
This engine type is designed to run on fuel gas or on liquid fuel. The fuel gas is
evaporated Liquefied Natural Gas (LNG). The liquid fuel comprises a wide
range of marine fuels such as Marine Gas Oil (MGO) and Heavy Fuel Oil (HFO)
of varying qualities. This fuel flexibility is made possible by WinGD’s low-pres-
sure technology. The operating mode can be changed while the engine is running
without any loss of power.
Special characteristics of short-stroke dual-fuel engines
Designed to be smaller than other engines at this bore size, the short-stroke en-
gines have a reduced length and a reduced piston removal height, which is ideal
for engines with limited available installation space. Dual-fuel operation is the
most common application for the X-DF engines. This means that the engine can
either operate in gas or diesel mode. The operating mode can be changed while
the engine is running without any loss of power.
Bore:
Stroke:
Number of cylinders:
620mm
2,245mm
5 to 8
Power (MCR):
Speed (MCR):
Mean effective pressure:
Stroke/bore ratio:
2,110kW/cyl
108rpm
17.3 bar
3.62

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the WinGD X62DF-S2.0 and is the answer not in the manual?

WinGD X62DF-S2.0 Specifications

General IconGeneral
BrandWinGD
ModelX62DF-S2.0
CategoryMarine Equipment
LanguageEnglish