WinGD X62DF-S2.0 User Manual

Marine Installation Manual 2022-03 3-6
3 Engine Installation
3.2 Conditions and requirements
X62DF-S2.0
3.2.3 Ancillary system design parameters
The layout of the engine’s ancillary systems is based on the rated performance
(rating point Rx, CMCR). The given design parameters must be considered in
the plant design to ensure a proper function of the engine and its ancillary sys-
tems:
Gas mode output can depend on ambient conditions and gas quality. The cyl-
inder water outlet temperature and the oil temperature before engine are system-
internally controlled and have to remain at the specified level.
Cylinder cooling water outlet temperature:
Oil temperature before engine:
Exhaust gas back pressure at rated power (Rx):
90 °C
45 °C
30 mbar

WinGD X62DF-S2.0 Specifications

General

Brand	WinGD
Model	X62DF-S2.0
Category	Marine Equipment
Language	English