WinGD X62DF-S2.0 User Manual

Marine Installation Manual 2022-03 5-8
5 Engine Automation
5.4 Propulsion control systems
X62DF-S2.0
5.4.2 Recommended manoeuvring characteristics
The vessel speed is adjusted by the engine telegraph. Manoeuvring, e.g. for
leaving a port, is available from full astern to full ahead. For regular full sea op-
eration, the engine power can be further increased up to 100% CMCR power.
To protect the engine, any increase or decrease in power is limited by a rate of
change, considering the warm-up respectively cool-down times. Therefore, de-
pending on the magnitude of any change in power, it takes time to reach the re-
quired engine output; see the graphs and tables in this section (5.4.2).
Figure 5-5 Manoeuvring speed /power settings for FPP /CPP installations
For further information about the range of operating modes, refer to section
1.3 Fuel operating modes,  1-8.
SM-0213
60 - 70
For FPP installations:
Recommended values for
the manoeuvring positions
in percentage of CMCR speed
FULL
HALF
SLOW
DEAD
AHEADASTERN
SLOW
STOP
SLOW
FULL
HALF
DEAD
SLOW
45 - 55
35
- 45
25
- 35
25
- 35
35
- 45
45
- 55
60
- 70
22 - 34
For CPP installations:
Recommended values for
the manoeuvring positions
in percentage of CMCR power
FULL
HALF
SLOW
DEAD
AHEADASTERN
SLOW
STOP
SLOW
FULL
HALF
DEAD
SLOW
9 - 17
4
- 9
1.5
- 4.5
1.5
- 4.5
4
- 9
9
- 17
22
- 34

WinGD X62DF-S2.0 Specifications

General

Brand	WinGD
Model	X62DF-S2.0
Category	Marine Equipment
Language	English