Marine Installation Manual 2022-03 0-4
0 Preface
X62DF-S2.0
General Technical Data (GTD)
The General Technical Date (GTD) is an application that is used to calculate the
engine performance data such as temperatures, flow rates, and consumption fig-
ures based on the selected engine rating and tuning options. The output gener-
ated by the GTD is used to design the marine propulsion plant and can be used
for all engines within the WinGD portfolio.
Figure 0-1 GTD screenshot
GTD output
In addition to the output of characteristic parameters in the whole rating field of
an engine, the GTD application also delivers data on the capacities of coolers,
pumps, starting air bottles and air compressors. It provides additional informa-
tion on engine radiation, the power requirement for ancillary systems, and
output data suitable for estimating the size of ancillary equipment. Furthermore,
the GTD can generate data such as the available components and options for
specification and engine rating. In addition to the standard output for ISO refer-
ence and design conditions, further operating conditions for which information
is required can be defined.
The GTD application is accessible on the WinGD Customer Portal or on the
WinGD webpage using the following link:
https://www.wingd.com/en/media/general-technical-data
Operation and maintenance manuals
After the successful completion of the engine design and installation phase, addi-
tional documents are available to support the complete lifecycle of each engine.
This additional documentation is available on the WinGD Customer Portal and
this includes the following documents:
• The Operation Manual (OM)
• The Maintenance Manual (MM)
• The Spare Parts Catalogue (SPC)
To Next Page
Loading...
Need help?
General