EasyManuals Logo

Xerox Versant 280 Press User Manual

Xerox Versant 280 Press
375 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background image
Print: 317 x 482 mm (12.48 x 18.98 in.)
Copy: 293 x 426 mm (11.54 x 16.77 in.)
Paper Size Ranges
Minimum:
Trays 1–3: 140 x 182 mm (5.51 x 7.17 in.)
Tray 5 (Bypass): 96 x 146 mm (3.78 x 5.75 in.)
Trays 6, 7 (optional Advanced Oversized High Capacity Feeder without Envelope Support Kit):
182 x 182 mm (7.17 x 7.17 in.)
Trays 6, 7 (optional Advanced Oversized High Capacity Feeder with Envelope Support Kit): 98
x 182 mm (3.86 x 7.17 in.)
Tray 6 (optional Oversized High Capacity Feeder with Envelope Support Kit): 100 x 182 mm
(3.94 x 7.17 in.)
Maximum:
Trays 1–3: 330.2 x 488 mm (13 x 19.2 in.)
Tray 5 (Bypass): 330.2 x 488 mm (13 x 19.2 in.)
Tray 5 (Bypass) Extra Long Sheet, 1-sided: 330.2 x 660 mm (13.0 x 26.0 in.)
Trays 6, 7 (optional Advanced Oversized High Capacity Feeder): 330.2 x 488 mm (13.0 x 19.2
in.)
Printing Resolution
Print Engine Imaging Resolution: 2400 x 2400 dpi
Print Server RIP Resolution (print server to print engine): 1200 x 1200 dpi
FFiirrsstt--PPrriinntt--OOuutt TTiimmee
First Print-Out Time is measured from the time that the printer starts to the time the trailing edge of
the sheet exits the Offset Catch Tray.
Note: If the system is equipped with various types of finishing devices, the First-Print-Out Time
varies depending on the length of the paper path required to transport that paper.
From a cold start (power on or power saver), the system takes less than 5 minutes to start printing.
From standby mode, the system usually takes less than 1 minute to start printing.
In Ready Mode, on average, the First-Print-Out Time is less than 8 seconds for color and less than
10 seconds for black and white.
When you copy or print during initial power on, the system requires 30–45 seconds to produce the
first print.
Switching from a color mode job to a black and white job or the reverse requires on average 30–
60 seconds.
60 seconds is needed after a paper jam. to ensure that the system is recovered from possible
contamination, and to ensure that the image quality is optimized.
19

Table of Contents

Other manuals for Xerox Versant 280 Press

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Versant 280 Press and is the answer not in the manual?

Xerox Versant 280 Press Specifications

General IconGeneral
BrandXerox
ModelVersant 280 Press
CategoryAll in One Printer
LanguageEnglish

Related product manuals