Trays 8 and 9 Paper Jams at Lever 1d and Knob 1c
1. Open the front cover of the feeder module.
2. Move the lever 1d upward and remove the jammed paper.
Note: If paper is torn, check inside the machine and remove it.
3. If the paper cannot be removed, turn the knob 1c clockwise, then remove the jammed paper.
4. Return the lever 1d to the original position.
5. Close the front door of the feeder module.
Note: If the front cover of the feeder module is not completely closed, a message will
appear and the press
will not operate.
294
To Next Page
Loading...
Need help?
General
