4. If you have difficulty when removing jammed paper, open lever 1a upward (1) and turn knob 1e
counterclockwise (2). Remove the jammed paper (3).
5. Return lever 1a to its original position.
6. Close the Inserter front cover.
Inserter Fault Messages
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops
printing and a message appears on the press touch screen. A graphical illustration shows the location
of the fault with a brief explanation of corrective actions for clearing the fault. If a fault occurs in
more than one location, the illustration changes to indicate the multiple locations and the required
corrective actions.
The touch screen also displays a Faults button which provides information about the fault and
detailed instructions for correcting the fault. The (E) code on the upper-left part of the Fault message
displays which error indicator is lit on the Inserter control panel (E1, E2, E3).
Inserter Fault Code Information
When a fault occurs, such as paper jams, open doors or covers, or a press malfunction, the press stops
printing and a message appears on the press touch screen.
The touch screen also displays a Faults button which provides information about the fault and
detailed instructions for correcting the fault.
Tip: Inserter faults are identified by the codes which start with the three-digit numbers 012,
013, and 024.
308
To Next Page
Loading...
Need help?
General
