• After removing paper jams, close all doors and covers. The press cannot print when doors or covers
are open.
• After clearing a paper jam, printing automatically resumes from the state before the paper jam
occurred.
• If all paper jams are not cleared, an error message continues to display on the press touch screen.
To clear any remaining jams, refer to the press touch screen for instructions and information.
Clearing Paper Jams on the Interface Decurler Module
1. Open the front cover on the Interface Decurler Module (IDM).
2. Remove jammed paper:
a. Open lever 1a downward.
b. Turn knob 1b counterclockwise.
Important: To ensure the jammed paper exits the area, turn the knob a minimum of
ten (10) times or more.
c. Remove the jammed paper.
Important: Remove the jammed paper by carefully pulling it out of the area.
301
To Next Page
Loading...
Need help?
General
