June 2014
4-39
Xerox® WorkCentre® 3215/3225 Multifunction Printer Service Manual
REP 1.28, REP 1.29
Repairs
REP 1.28 ADF / Scanner Assembly
Parts List on PL 1.1
Removal
1. Switch Off the Printer and unplug the Power Cord.
2. Remove the Right Side Cover (REP 1.2).
3. At the Rear of the printer, remove the screws (2) (Figure 1).
Figure 1 ADF / Scanner Screws
4. Remove the ADF / Scanner Assembly (Figure 2):
a. Disconnect the connectors (3) from the Main PWB
b. Slide the ADF to the Front and lift it off of the printer, routing the wires through the
Middle Cover.
Figure 2 ADF / Scanner Removal
Replacement
Install the components in the reverse of removal.
Screws
Connectors
Front
To Next Page
Loading...
Need help?
General
