Xerox WorkCentre 4260 Series System Administration Guide 129
14 SMart eSolutions
This chapter explains how to set up the SMart eSolutions of the machine.
This is the procedure to follow to install and setup this feature:
1. Overview on page 129
2. Information Checklist on page 129
3. Setup Meter Assistant on page 130
4. Setup Supplies Assistant on page 130
Overview
SMart eSolutions provide a setup page to guide you through the steps required to configure
the machine for automatic meter readings. SMart eSolutions allows the machine to
automatically send data to Xerox. This data is used for billing (MeterAssistant) and toner
replenishment (SuppliesAssistant).
There are two ways to register a machine for SMart eSolutions:
• SMart eSolutions Windows Client
• CentreWare Web
For a full description of SMart eSolutions and to download the applications (SMart
eSolutions Windows Client or CentreWare Web), refer to www.xerox.com/smartesolutions
NOTE: SMart eSolutions is not available in all countries. Refer to your Xerox Representative
for further information.
Information Checklist
Before registering machines for Meter Assistant, please ensure that the following items are
available and/or the tasks have been performed:
1. Register for an account on www.xerox.com/smartesolutions. the machines that you
wish to register for Automatic Meter Readings.
2. Ensure that all machines to be used with SMart eSolutions are fully functioning on
the network.
3. To configure SMart eSolutions via the SMart eSolutions or CentreWare Web
installations, SNMP must be enabled on the machine(s).
To Next Page
Loading...
Need help?
General
