Xerox WorkCentre 4260 Series User Manual

3Network Installation
22 Xerox WorkCentre 4260 Series System Administration Guide
• IPX Socket Number: Enter the IPX socket number of the SNMP agent.
• SNMP Version: Select the SNMP version of the SNMP agent.
Traps:
• TRAP Community Name: Enter the trap community name of the SNMP agent.
• Trap to be Received: Select the types of traps to receive from the SNMP agent.
• Delete – Selecting a trap on the [SNMP Configuration > Advanced] page and clicking
this button deletes the trap. You can select and delete multiple traps at once.
SSDP
Allows you to configure the SSDP protocol settings as follows:
• Protocol – Displays whether the protocol is enabled or disabled.
• Time to Live – Specify the maximum TTL (time to live).
AppleTalk
Information Checklist
Before starting the installation procedure, please ensure that the following items are
available and/or the tasks have been performed:
1. Existing operational AppleTalk network.
2. AppleTalk Name to assign to your printer.
3. AppleTalk Zone (if used) where your printer will reside.
Procedure
Setup AppleTalk at the machine
1. Press the <Log In/Out> button on the machine to enter the Tools Pathway.
2. Enter the Administrator’s Password. The default is 1111.
3. Touc h [Enter].
4. Press the <Machine Status> button.
5. Touch th e [Tools] tab.
6. Touc h [Connectivity and Network Setup].
7. Touc h [Advanced].
8. Touc h [Network Setting].
9. Touc h [Network Setup].
10. Touc h [AppleTalk].
11. Touc h [Protocol].
12. Touc h [Enable].

Xerox WorkCentre 4260 Series Specifications

General

Brand	Xerox
Model	WorkCentre 4260 Series
Category	All in One Printer
Language	English