Xerox WorkCentre 4260 Series User Manual

4Print Drivers
44 Xerox WorkCentre 4260 Series System Administration Guide
i) Click on the [Next] button.
j) Click on the [Finish] button.
9. You will return to the Add Printer Wizard window and be prompted for a Printer
Driver.
10. Load the Print and Fax Drivers CD into the CD drive. If the CD autoruns, click [Exit].
11. Click on the [Have Disk] button.
12. Click on the [Browse] button.
13. Locate the Drivers folder on the CD and click on the required driver from the list.
14. Click on the [Open] button.
15. Click on the [OK] button.
16. Select the model of your machine from the list.
17. Click on the [Next] button.
18. Enter Printer Name (or accept the default name).
19. Click on the [Next] button.
20. If you want this to be your default printer, click on [Yes].
21. Click on the [Next] button.
22. The Printer Sharing Screen appears.
If you will be sharing this printer with other clients, then:
a) Select:
• [Share As:] - Windows 2000.
• [Share Name] - Windows XP/2003.
b) Enter a Share Name.
c) Click on the [Next] button.
23. Enter the [Location] (Add a Comment if necessary.)
24. Click on the [Next] button.
25. Click on [Yes] to print a test page. Close the Test Page window if necessary.
26.
Click on the [Next] button.
27. Click on the [Finish] button. The printer driver will install.
28. Verify that the test page is printed at the machine.
AppleTalk Printing
The Internet Services AppleTalk
®
page allows you to configure the machine to support
AppleTalk
®
.
Information Checklist
1. The AppleTalk settings must be correctly configured on the machine.
2. Locate the CentreWare Print and Fax Drivers CD delivered with your machine.

Xerox WorkCentre 4260 Series Specifications

General

Brand	Xerox
Model	WorkCentre 4260 Series
Category	All in One Printer
Language	English