EasyManuals Logo
Home>Yealink>IP Phone>SIP-T33P

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background imageLoading...
Page #131 background image
Using Handsets with T57W/T54W/T53W/T53 Phones
127
Handset Wallpaper
Wallpaper is an image used as the background for the handset idle screen. Users can select an image from hand-
set’s built-in background.
Topic
Handset Wallpaper Configuration
Handset Wallpaper Configuration
The following table lists the parameter you can use to configure the handset wallpaper.
Parameter
custom.handset.wallpaper <y0000000000xx>.cfg
Description
It configures the wallpaper displayed on the handset LCD screen.
Note: It will take effect on all handsets that are registered on the same phone. It works only if “stat-
ic.auto_provision.handset_configured.enable is set to 1 (Enabled).
Permitted
Values
1-Wallpaper1
2-Wallpaper2
3-Wallpaper3
4-Wallpaper4
5-Wallpaper5
Default
-1, do not change the wallpaper set on each handset.
Supported
Devices
W53H, W56H
Handset UI
OK > Settings > Display > Wallpaper
Handset Screen Saver
The screen saver of the handset is designed to protect your LCD screen. You can enable the screen saver to pro-
tect the LCD screen, an analog clock will be activated and appear on the LCD screen after the handset is idle for
approximately 10 seconds.
It is only applicable to W56H/W53H handsets.
Topic
Handset Screen Saver Configuration
Handset Screen Saver Configuration
The following table lists the parameter you can use to configure the handset screen saver.
Parameter
custom.handset.screen_saver.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables screen saver feature.
Note: It will take effect on all handsets that are registered on the same phone. It works only if “stat-
ic.auto_provision.handset_configured.enable is set to 1 (Enabled).
Permitted
Values
-1-Do not modify the handset configuration (Keep the original configuration of the handset).
0-Disabled
1-Enabled, an analog clock will be activated and appear on the LCD screen if no user activity is
sensed for approximately 10 seconds.

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals