Yealink SIP-T33P Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
273
Permitted
Values
Integer from 1 to 3 (4 for T3 phones)
Default
1
Supported
Devices
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T33P, T33G, T27G
Enhanced DSS Keys
Enhanced DSS Keys (EDK) enables users to customize the functions of the phone’s DSS keys.
With EDK, You can do the following:
l Assign a frequently-used function to DSS keys.
l Create menu shortcuts for frequently-used phone settings as need.
l Use EDK macro strings as the contact number.
Application scenarios involve the following:
l Adding new DSS keys to simplify the operation of common telephony tasks that may need more than one
keypress with the default configuration.
l Removing certain default DSS keys for the functions that may be redundant or never used.
l One-touch connecting to the contact's extension number without entering DTMF manually.
The rules for configuring EDK for DSS keys are different. Before using EDK, you are advised to become familiar
with the macro language.
For more information on Enhanced DSS Keys, refer to Using Enhanced DSS Keys on Yealink IP Phones.
Topics
Guidelines for Configuring Enhanced DSS Keys
Macro Action Strings
EDK Configuration
EDK List Configuration
EDK User Input Prompt Configuration
EDK Soft Keys Configuration
Example: Configuring EDK List for a Line Key
Example: Using EDK Macro Strings as the Contact Number
Guidelines for Configuring Enhanced DSS Keys
The following guidelines will help you to configure EDK efficiently:
l Activation of EDK functions requires valid macro construction.
l Character “$” delimits the parts of the macro string (except the digits only) and it must exist in pairs. For more
information, refer to Macro Action Strings.
l Macros can be invoked in the format “!<macro name>”, where <macro name > is defined by the parameter
“edk.edklist.X.mname”.
l If there are two or more same macros, the soft key or DSS key will invoke the macro with the smallest value of X
defined by the parameter “edk.edklist.X.mname”.
Macro Action Strings
Before using EDK, you must be familiar with macro language shown in this section.
The following table shows the basic macro action string syntax when creating EDK macros:
Macro Action Description
Digits
The characters to be sent. The following characters are supported: . @ * # + 0-
9 and English letters. The appearance of this parameter depends on the

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm