EasyManuals Logo
Home>Yealink>IP Phone>SIP-T33P

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
130
The outgoing line for handset 4 is line 4.
The outgoing line for handset 5 is line 5.
Web UI
Account > Number Assignment > Outgoing lines
Parameter
handset.X.dial_out_default_line
[1]
<y0000000000xx>.cfg
Description
It configures the default line to place outgoing calls for a specific handset.
Permitted
Values
Integer from 1 to 5
Default
X
Supported
Devices
All handsets except CP930W
Web UI
Account > Number Assignment > Outgoing lines > Default
Handset UI
W53H/W56H:
OK > Settings > Telephony > Default Line
[1]
X is the handset ID. X=1-5.
End Call on Hook
You can configure whether to end a call when you place the handset into the charging cradle.
Topic
End Call on Hook Configuration
End Call on Hook Configuration
The following table lists the parameter you can use to configure the end call on hook.
Parameter
phone_setting.end_call_on_hook.enable <y0000000000xx>.cfg
Description
It enables or disables to end a call when placing the handset into the charger cradle.
Permitted
Values
0-Never
1-Always
Default
1
Supported
Devices
W53H, W56H
Web UI
Features > General Information > End Call On Hook
Advisory Tones
Advisory tones are the acoustic signals of your handset, which inform you of different actions and states.
It is not applicable to DD phones.
You can configure the following advisory tones independently for each other:
l
Keypad Tone: plays when you press any key of the keypad. For CP930W, you can only configure it by nav-
igating to Menu > Settings > Basic Settings > Sound > Advisory Tones > Keypad Tone.
l
Touch Tone: plays when you tap the keys (except the off-hook key and the touch keypad). You can only con-
figure it by navigating to Menu > Settings > Basic Settings > Sound > Advisory Tones > Touch Tone. It is only
applicable to CP930W.

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals