Yealink SIP-T33P Administrator's Guide

Advanced Features
454
user is talking.
Note: It works only if “blf.enhanced.talking.enable” is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
BLF Key LED/Icon and Behavior for Parked-Against State Configuration
The following table lists the parameters you can use to configure BLF key LED/icon and Behavior for the parked-
against state (a call is being parked against the monitored phone).
Parameter
blf.enhanced.parked.enable <y0000000000xx>.cfg
Description
It enables or disables the custom configuration when a call is parked against the monitored phone.
Permitted
Values
0-Disabled
1-Enabled, the phone will display the custom BLF/BLF List DSS key LED status/icon colors and per-
form the custom behavior when pressing the BLF/BLF List DSS key.
Default
0
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Parameter
blf.enhanced.parked.led <y0000000000xx>.cfg
Description
It configures the custom BLF/BLF List DSS key LED status/icon colors when a call is parked against
the monitored phone.
This value uses the same macro action string syntax as an Enhanced DSS key.
Example:
blf.enhanced.parked.led = $LEDg1000o$
For T57W/T48U/T48S/T48G phones, the BLF/BLF List DSS key field displays a green icon for 1000ms
and then turns to white.
For other phones, the BLF/BLF list DSS key LED glows green for 1000ms and then goes out.
Note: It works only if “blf.enhanced.parked.enable” is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Parameter
blf.enhanced.parked.callin.action <y0000000000xx>.cfg
Description
It configures the behavior when pressing the BLF/BLF list DSS key if the monitor is ringing and a call
is parked against the monitored phone.
Note: It works only if “blf.enhanced.parked.enable” is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm