Yealink SIP-T33P Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
498
Description
It configures a return code and reason of SIP response messages when the phone does not answer
an incoming call. A specific reason is displayed on the caller’s phone screen.
Permitted
Values
404-Not Found
480-Temporarily Unavailable (Temporarily not available)
486-Busy Here
600-Busy Everywhere
603-Decline
Default
486
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Web UI
Features > General Information > Return Code When No Answer
Hide Feature Access Codes
Hide Feature Access Codes feature enables the IP phone to display the feature name instead of the dialed feature
access code automatically. For example, the dialed call park code will be replaced by the identifier “Call Park”
when you park an active call.
The hide feature access codes feature is applicable to the following features:
l Voice Mail
l Pick up
l Group Pick up
l Barge In (not applicable to T30P/T30/T19(P) E2/CP920 phones)
l Retrieve
l Call Park
l Call Pull (not applicable to T30P/T30/T19(P) E2/CP920 phones)
Topic
Hide Feature Access Codes Configuration
Hide Feature Access Codes Configuration
The following table lists the parameters you can use to configure the hide feature access codes.
Parameter
features.hide_feature_access_codes.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display the feature name instead of the feature access code when
dialing and talking.
The following feature access codes will be replaced when this feature is enabled:
l Voice Mail
l Pick up
l Group Pick up
l Barge In
l Retrieve
l Call Park
l Group Park
l Call Pull
Permitted
Values
0-Disabled
1-Enabled

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm