EasyManuals Logo
Home>Yealink>IP Phone>SIP-T33P

Yealink SIP-T33P Administrator's Guide

Yealink SIP-T33P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #470 background imageLoading...
Page #470 background image
Advanced Features
466
Topic
CSTA Control Configuration
CSTA Control Configuration
The following table lists the parameter you can use to configure CSTA control.
Parameter
features.csta_control.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the CSTA feature.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Web UI
Features > Remote Control > CSTA Control
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Action URL
Action URL allows the phones to interact with web server applications by sending an HTTP or HTTPS GET request.
You can specify a URL that triggers a GET request when a specified event occurs. Action URL can only be
triggered by the predefined events (for example, Open DND). The valid URL format is:
http(s)://<server-
IPAddress>/help.xml?
.
An HTTP or HTTPS GET request may contain a variable name and a variable value, separated by “=”. Each vari-
able value starts with $ in the query part of the URL. The valid URL format is:
http(s)://<server-
IPAddress>/help.xml?variable name=$variable value
. The variable name can be customized by users, while the
variable value is predefined. For example, a URL “http://192.168.1.10/help.xml?mac=$mac” is specified for the
event Mute, the $mac will be dynamically replaced with the MAC address of the IP phone when the IP phone mutes
a call.
Topics
Predefined Events List
Variable Values List
Action URL Configuration
Predefined Events List
The following table lists the predefined events for action URL.
Event
Description
Setup Completed When the IP phone completes startup.
Registered When the IP phone successfully registers an account.
Unregistered When the IP phone logs out of the registered account.
Register Failed When the IP phone fails to register an account.
Off Hook When the IP phone is off hook.
On Hook When the IP phone is on hook.

Table of Contents

Other manuals for Yealink SIP-T33P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33P and is the answer not in the manual?

Yealink SIP-T33P Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Operating system installedLinux
Lines quantity4 lines
Phonebook capacity1000 entries
Number of VoIP accounts4
Volume controlButtons
Number of function keys5
Display diagonal2.4 \
Display resolution320 x 240 pixels
Voice codecsAGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithmsAES, HTTPS
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
RJ-9 ports quantity1
Ethernet LAN (RJ-45) ports2
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
Power consumption (typical)3 W
Power consumption (Power over Ethernet (PoE))5 W
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth186 mm
Width212 mm
Height146 mm

Related product manuals