Yealink SIP-T33P Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
269
Ext Keys Configuration
Ext Keys Configuration
The following table lists the parameters you can use to configure ext keys.
Parameter
expkey.type_range.custom <y0000000000xx>.cfg
Description
It configures the list for available ext key types list when configuring ext keys.
To assign function types, specify ext key type IDs which start with or without a symbol ”+”. For
example, “+2,15,16,7,4” or “2,15,16,7,4” means only “N/A”, “Forward”, “Line”, “BLF”, “Recall”, “Hold”
types are available when you configure ext keys.
To remove a function type, specify ext key type IDs which start with the symbol “-”. For example, “-14,
5, 2” means to remove “Intercom”, “DND”, “Forward” types from the ext key types list. These ext key
types are not available when you configure ext keys.
Note: Multiple ext key type IDs are separated by commas. N/A type is always kept.
Permitted
Values
Blank or 0 (all valid function types are available);
Dsskey type IDs.
For supported Dsskey types and IDs, refer to Supported Dsskey Types.
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T29G, T27G
Parameter
expansion_module.X.key.Y.type
[1]
<y0000000000xx>.cfg
Description
It configures the feature for a specific ext key.
Permitted
Values
0-N/A
1-Conference
2-Forward
3-Transfer
4-Hold
5-DND
7-Recall
8-SMS
9-Direct Pickup
10-Call Park
11-DTMF
12-Voice Mail
13-Speed Dial
14-Intercom
15-Line
16-BLF
17-URL
18-Group Listening
20-Private Hold
22-XML Group
23-Group Pickup
24-Multicast Paging
(Paging)
25-Record
27-XML Browser
34-Hot Desking
35-URL Record
37-Switch (only applicable to ext key 1 for
T29G/T27G phones)
38-LDAP (only appears when “ldap.enable=1”)
39-BLF List
40-Prefix
41-Zero Touch
42-ACD
45-Local Group
50-Phone Lock
56-Retrieve Park
61-Directory
66-Paging List
73-Custom Key (only available when “fea-
tures.enhanced_dss_keys.enable=1”)
77-Mobile Account (only available to
T57W/T54W/T53W/T53/T48U/T46U/T43U phones
when the Bluetooth-enabled mobile phone is con-
nected)
104-Google Contacts (only appear when “google_
contact_server.enable = 1”)

Yealink SIP-T33P Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Operating system installed	Linux
Lines quantity	4 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	4
Volume control	Buttons
Number of function keys	5
Display diagonal	2.4 \
Display resolution	320 x 240 pixels
Voice codecs	AGC, AJB, CNG, G.711a, G.711u, G.722, G.723.1, G.726, G.729, G.729A, PLC, VAD, iLBC
Security algorithms	AES, HTTPS
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
RJ-9 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Power consumption (typical)	3 W
Power consumption (Power over Ethernet (PoE))	5 W
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %

Weight and Dimensions

Depth	186 mm
Width	212 mm
Height	146 mm